X
| Serial number | Compatibility agent scheme | Impact strength(KJ/m2) | Tensile strength(MPa) | Bending strength(MPa) | Flexural modulus(MPa) | Effective branch pulling rate(%) | Effect |
| 1 | No compatibilizer added | 5.7 | 42.47 | 57.6 | 3025 | / | lbond-2 series can effectively enhance the impact, tensile, and bending properties of fiberglass reinforced renewable PP |
| 2 | 3% lbond-2001 | 11.9 | 55.4 | 70.21 | 3193 | 0.8-1.2 | |
| 3 | 3% lbond-2002 | 13.26 | 56.63 | 75.61 | 3374.8 | 1.2-1.5 |
Efficient new anhydride grafted SEBS compatibilizer
Efficient new anhydride grafted SEBS compatibilizer
Brand:
Ibond-3001->grafting rate of 1.2% -1.5%, high grafting rate
Ibond-3002->grafting rate 1.8% -2.5%, ultra-high grafting rate
Advantages: Adopting a new type of anhydride grafted SEBS, with ultra-high grafting rate, low odor, good compatibility and toughening effect;
Application scenarios: Suitable for toughening nylon materials, glass fiber reinforced nylon materials, nylon composite materials, glass fiber reinforced polypropylene materials, polyester materials, etc. It can effectively improve the interface compatibility and toughness of related materials.
Suggested dosage: 3% -10%, can replace traditional POE-g-MAH and SEBS-g-MAH, and can also be used in combination with SEBS Efficient new anhydride grafted SEBS compatibilizer
Efficient new epoxy grafted SEBS compatibilizer
Brand:
Ibond-1001->grafting rate 1.0% -1.3%, moderate grafting rate
Ibond-1002->grafting rate 1.3% -1.6%, high grafting rate
Advantages: Adopting a new type of epoxy grafted SEBS, with high epoxy value, low odor, low VOC, and good compatibility effect;
Application scenarios: Suitable for toughening and compatibilization systems of polyester composite materials and nylon composite materials, such as PLA/PC composites, PET materials, PBT materials, and PC/ABS materials, etc;
Suggested dosage: 5% -10%, can replace traditional SEBS-g-GMA and POE-g-GMA, with a dosage of 60% -80% of traditional compatibilizers.
Efficient new epoxy grafted SEBS compatibilizer
| Serial number | Compatibility agent scheme | Impact strength(KJ/m2) | Tensile strength(MPa) | Elongation at break | Heat Deflection Temperature(0.45MPa ¡æ) | Grafting rate after purification(%) | After the addition of the new epoxy grafted SEBS, the impact resistance and elongation at break of polyester composite materials can be effectively improved, while maintaining the original tensile properties and heat deformation temperature |
| 1 | No compatibilizer added | 9.3 | 52.4 | 53.14 | 108 | / | |
| 2 | 5% lbond-1001 | 21 | 58.7 | 97.98 | 101 | 1.0-1.3 | |
| 3 | 5% lbond-1002 | 61.47 | 57.13 | 126.31 | 97 | 1.3-16 |